TFES-2HD - 2 Mil Skived PTFE Film Tape

Is a high density, TENSILIZED skived PTFE film which provides higher tensile strength, lower elongation higher dielectric strength than regular skived film (primarily used for electrical applications listed below & for roll protection in flat die extrusion)

Pure skived PTFE with a high temperature silicone adhesive. Used in electrical applications such as harness/coil wraps separators, transformers slot liners where good insulation heat resistance are required.

Meets Spec AA-59474 Type-1, Superseding 23594C Type 1.

Applications:

• Heat sealing bars jaws
• Labeling machine pressure pads
• Chute liners
• Anti-friction devices, bearings, forming dies, aircraft mold release guide rails where high temperature, maximum slip and lubricity are required
• High elongation permits tight wrapping; conforms to sharp bends/irregular surfaces

Physical Properties:

• Color: Gray
• Backing Thickness: 2 mil/0.002"
• Total Tape Thickness: 3.5 mil/0.0035"
• Break Strength: 30 lb/in
• Adhesion: 25 oz/in
• Elongation: 100%
• Maximum Operating Temperature: 500°F
• Dielectric Strength: 8 kV
• 36 Yard Rolls
• 3" Plastic Core

Alternative to 3M #5480;Permacel #P422 ; DeWal #204-2HD; St. Gobain #2255-2 ;
Taconic #6445-02; Chemfab #380-02; Lanmar #585-2; Bondtec #932F